e-space
Manchester Metropolitan University's Research Repository

Items where Author is "Haider, Julfikar"

Up a level
Export as [feed] Atom [feed] RSS
Group by: Item Type | No Grouping
Number of items: 64.

Article

Islam, Md Robiul; Abdulrazak, Lway Faisal; Nahiduzzaman, Md; Goni, Md Omaer Faruq; Anower, Md Shamim; Ahsan, Mominul; Haider, Julfikar; et al.
(2022) Applying Supervised Contrastive Learning for the Detection of Diabetic Retinopathy and its Severity Levels. Computers in Biology and Medicine. p. 105602. ISSN 0010-4825 (In Press)

Chavan, Vijaykumar and Kurahatti, Rajashekar V and Haider, Julfikar and Goudar, Dayanand M and Patil, Ishwargouda S (2022) Evaluating Comparative Wear Behaviour of Al-15%Si Based Alloy/Composites Reinforced with Zinc and Zirconium Oxide. Tribology: Materials, Surfaces and Interfaces. ISSN 1751-584X (In Press)

Shehbaz, Tauheed and Junaid, Massab and Khan, Fahd Nawaz and Haider, Julfikar (2022) Dissimilar P-TIG welding between Inconel 718 and commercially pure Titanium using niobium interlayer. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. ISSN 0954-4089

Alhotan, Abdulaziz and Elraggal, Alaaeldin and Yates, Julian and Haider, Julfikar and Jurado, Carlos Alberto and Silikas, Nikolaos (2022) Effect of Different Solutions on the Colour Stability of Nanoparticles or Fibre Reinforced PMMA. Polymers, 14 (8). p. 1521.

Shahinur, Sweety and Sayeed, MM Alamgir and Hasan, Mahbub and Sayem, Abu Sadat Muhammad and Haider, Julfikar and Ura, Sharifu (2022) Current development and future perspective on natural jute fibers and their biocomposites. Polymers, 14 (7). p. 1445.

Uddin, Mohammad Abbas; Rahman, Md Mahbubor; Haque, Abu Naser Md Ahsanul; Smriti, Shamima Akter; Datta, Eshita; Farzana, Nawshin; Chowdhury, Sutapa; et al.
(2022) Textile colouration with natural colourants: A review. Journal of Cleaner Production, 349. ISSN 0959-6526

Vadivel, Srinivasan and Sengodan, Boopathi C and Ramasamy, Sridhar and Ahsan, Mominul and Haider, Julfikar and Rodrigues, Eduardo MG (2022) Social Grouping Algorithm Aided Maximum Power Point Tracking Scheme for Partial Shaded Photovoltaic Array. Energies, 15 (6). p. 2105.

Aljafery, Ali M and Al-Jubouri, Ola M and Wally, Zena J and Almusawi, Rajaa M and Abdulrudha, Noor H and Haider, Julfikar (2022) The Effects of Incorporating Ag-Zn Zeolite on the Surface Roughness and Hardness of Heat and Cold Cure Acrylic Resins. Journal of Composites Science, 6 (3). p. 85.

Shehbaz, Tauheed and Khan, Fahd Nawaz and Junaid, Massab and Haider, Julfikar (2022) Investigating the bonding mechanism of P-TIG welded CpTi/Inconel 718 dissimilar joint with Nb interlayer. Materials Letters, 313. ISSN 0167-577X

Abass, Abeer Abdulridha; Al-Magsoosi, Mohanad Jameel Najm; Kadhim, Wijdan Abdulameer; Mustafa, Ruba; Ibrahim, Sana’a Abdulrazzaq; Aljdaimi, Abtesam Imhemed; Al-Nasrawi, Suhad Jabbar; et al.
(2022) Antimicrobial effect of Red Roselle (Hibiscus Sabdariffa) against different types of oral bacteria. Journal of medicine and life, 15 (1). pp. 89-97. ISSN 1844-3117

Al-Mussawi, Raja M and Farid, Farzaneh and Haider, Julfikar (2021) Effect of Die Materials on Marginal and Internal Adaptation of Zirconia Copings: An In Vitro Study. The Open Dentistry Journal, 15 (1). pp. 708-716. ISSN 1874-2106

Rahman, Md Mahabubur; Abdulrazak, Lway Faisal; Ahsan, Mominul; Based, Md Abdul; Rana, Md Masud; Anower, Md Shamim; Rikta, Khaleda Akter; et al.
(2021) 2D Nanomaterial-Based Hybrid Structured (Au-WSe2-PtSe2-BP) Surface Plasmon Resonance (SPR) Sensor With Improved Performance. IEEE Access, 10. pp. 689-698. ISSN 2169-3536

Alhotan, Abdulaziz and Yates, Julian and Zidan, Saleh and Haider, Julfikar and Jurado, Carlos Alberto and Silikas, Nikolaos (2021) Behaviour of PMMA Resin Composites Incorporated with Nanoparticles or Fibre following Prolonged Water Storage. Nanomaterials, 11 (12). p. 3453.

Ramalingam, Senthil Rajan and Boopthi, CS and Ramasamy, Sridhar and Ahsan, Mominul and Haider, Julfikar (2021) Induction Heating for Variably Sized Ferrous and Non-Ferrous Materials through Load Modulation. Energies, 14 (24). p. 8354.

Abass, Abeer Abdulridha and Abdulridha, Wasna’a Mohammed and Alaarage, Warood Kream and Abdulrudha, Noor Hassan and Haider, Julfikar (2021) Evaluating the antibacterial effect of cobalt nanoparticles against multi-drug resistant pathogens. Journal of medicine and life, 14 (6). pp. 823-833. ISSN 1844-122X

Aresh, Balaji and Khan, Fahd N and Haider, Julfikar (2021) Experimental investigation and numerical simulation of chip formation mechanisms in cutting rock-like materials. Journal of Petroleum Science and Engineering. p. 109869. ISSN 0920-4105

Nahiduzzaman, Md; Goni, Md Omaer Faruq; Anower, Md Shamim; Islam, Md Robiul; Ahsan, Mominul; Haider, Julfikar; Gurusamy, Saravanakumar; et al.
(2021) A Novel Method for Multivariant Pneumonia Classification based on Hybrid CNN-PCA Based Feature Extraction using Extreme Learning Machine with Chest X-Ray Images. IEEE Access. p. 1.

Mollah, Md Aslam and Sarker, Hasan and Ahsan, Mominul and Elahi, Md Towfik and Based, Md Abdul and Haider, Julfikar and Palani, Sivaprakasam (2021) Designing Highly Sensitive Surface Plasmon Resonance Sensor With Dual Analyte Channels. IEEE Access, 9. pp. 139293-139302.

Vadivel, Srinivasan and Boopthi, CS and Ramasamy, Sridhar and Ahsan, Mominul and Haider, Julfikar and Rodrigues, Eduardo MG (2021) Performance Enhancement of a Partially Shaded Photovoltaic Array by Optimal Reconfiguration and Current Injection Schemes. Energies, 14 (19). p. 6332.

Shehbaz, Tauheed and Khan, Fahd Nawaz and Junaid, Massab and Haider, Julfikar (2021) Investigating Nanoindentation Creep Behavior of Pulsed-TIG Welded Inconel 718 and Commercially Pure Titanium Using a Vanadium Interlayer. Metals, 11 (9).

Ebenezer, George and Adam Khan, M and Chellaganesh, D and Winowlin Jappes J, T and Haider, Julfikar (2021) Assessing Machinability and Surface characteristics of a Shape Memory Alloy (SMA) Processed through Wire Electro Spark Erosion Method. Archives of Metallurgy and Materials. ISSN 1733-3490 (In Press)

Ahmed, Kawsar and Hasan, Mahbub and Haider, Julfikar (2021) Electrical and Mechanical Properties of Sugarcane Bagasse Pyrolyzed Biochar Reinforced Polyvinyl Alcohol Biocomposite Films. Journal of Composites Science, 5 (9).

Al-Maula, Bushra Habeeb and Wally, Zena J and Dosh, Rasha H and Aljdaimi, Abtesam Imhemed and Al-Nasrawi, Suhad Jabbar Hamed and Haider, Julfikar (2021) Assessing the Effects of Administering Calcium Oxide Nanoparticles on Oral Mucosa and Tongue of Male Wister Rats. Nano Biomedicine and Engineering, 13 (3). pp. 311-320. ISSN 2150-5578

Alam, Nur-A and Ahsan, Md Mominul and Based, Md Abdul and Haider, Julfikar and Kowalski, Marcin (2021) An Intelligent System for Automatic Fingerprint Identification using Feature Fusion by Gabor Filter and Deep Learning. Computers and Electrical Engineering, 95. ISSN 0045-7906

Al-ibraheemi, Zahraa Abdulaali and Abdullah, Huda Abbas and Jawad, Nada Abdlameer and Haider, Julfikar (2021) Assessing Fracture Resistance of Restored Premolars with Novel Composite Materials: An In Vitro Study. International Journal of Dentistry, Volume. ISSN 1687-8728

Shahinur, Sweety and Hasan, Mahbub and Ahsan, Qumrul and Sultana, Nayer and Ahmed, Zakaria and Haider, Julfikar (2021) Effect of Rot-, Fire-, and Water-Retardant Treatments on Jute Fiber and Their Associated Thermoplastic Composites: A Study by FTIR. Polymers, 13 (15). p. 2571. ISSN 2073-4360

Al-Maula, Bushra Habeeb; Wally, Zena Jehad; Al-Magsoosi, Mohanad Jameel Najm; Dosh, Rasha Hatem; Mustafa, Ruba M; Al-Nasrawi, Suhad Jabbar Hamed; Alfutimie, Abdullatif; et al.
(2021) Studying Effects of Calcium Oxide Nanoparticles on Dentinogenesis in Male Wistar Rats. International Journal of Dentistry, 2021. pp. 1-9. ISSN 1687-8728

Alhotan, Abdulaziz and Yates, Julian and Zidan, Saleh and Haider, Julfikar and Silikas, Nikolaos (2021) Assessing Fracture Toughness and Impact Strength of PMMA Reinforced with Nano-Particles and Fibre as Advanced Denture Base Materials. Materials, 14 (15). p. 4127. ISSN 1996-1944

Chandran, Ilambirai Raghavan and Ramasamy, Sridhar and Ahsan, Mominul and Haider, Julfikar and Rodrigues, Eduardo MG (2021) Implementation of Non-Isolated Zeta-KY Triple Port Converter for Renewable Energy Applications. Electronics, 10 (14).

Zidan, Saleh and Silikas, Nikolaos and Al-Nasrawi, Suhad and Haider, Julfikar and Alshabib, Abdulrahman and Alshame, Alshame and Yates, Julian (2021) Chemical Characterisation of Silanised Zirconia Nanoparticles and Their Effects on the Properties of PMMA-Zirconia Nanocomposites. Materials, 14 (12).

Sakib, Nazmus and Ahmad, Rodina Binti and Ahsan, Mominul and Based, Md Abdul and Haruna, Khalid and Haider, Julfikar and Gurusamy, Saravanakumar (2021) A Hybrid Personalized Scientific Paper Recommendation Approach Integrating Public Contextual Metadata. IEEE Access.

Zidan, Saleh and Silikas, Nikolaos and Haider, Julfikar and Jahantigh, Javad and Alhareb, Ahmed and Yates, Julian (2021) Evaluating Polishability of Zirconia Impregnated PMMA Nanocomposite for Denture Base Application. Symmetry, 13 (6).

Alhotan, Abdulaziz and Yates, Julian and Zidan, Saleh and Haider, Julfikar and Silikas, Nikolaos (2021) Flexural Strength and Hardness of Filler-Reinforced PMMA Targeted for Denture Base Application. Materials, 14 (10).

Junaid, Massab and Khan, Fahd Nawaz and Shahbaz, Tauheed and Saleem, Haris and Haider, Julfikar (2021) Influence of filler on the microstructure, mechanical properties and residual stresses in TIG weldments of dissimilar titanium alloys. Acta Metallurgica Sinica (English Letters). ISSN 1006-7191

Panati, Poornima Udaychandra and Ramasamy, Sridhar and Ahsan, Mominul and Haider, Julfikar and Rodrigues, Eduardo MG (2021) Indirect Effective Controlled Split Source Inverter-Based Parallel Active Power Filter for Enhancing Power Quality. Electronics, 10 (8).

Mustafa, Ruba and Al Omari, Taher and Al-Nasrawi, Suhad and Al Fodeh, Rami and Dkmak, Alaa and Haider, Julfikar (2021) Evaluating in-Vitro Performance of Novel Nickel-Titanium Rotary System (TruNatomy) based on debris extrusion and preparation time from Severely Curved Canals. Journal of Endodontics, 47 (6). pp. 976-981. ISSN 0099-2399

Alam, Nur-A and Ahsan, Mominul and Based, Md Abdul and Haider, Julfikar and Rodrigues, Eduardo MG (2021) Smart Monitoring and Controlling of Appliances using LoRa Based IoT System. Designs, 5 (1). ISSN 2411-9660

Jahan, N and Rahman, MD M and Ahsan, Mominul and Based, Md Abdul and Rana, MM and Gurusamy, Saravanakumar and Haider, Julfikar (2021) Photonic Crystal Fiber Based Biosensor for Pseudomonas Bacteria Detection: A Simulation Study. IEEE Access, 9. pp. 42206-42215. ISSN 2169-3536

Alam, Nur-A and Ahsan, Md Mominul and Based, Md Abdul and Haider, Julfikar and Kowalski, Marcin (2021) COVID-19 Detection from Chest X-Ray images using Feature Fusion and Deep learning. Sensors, 21 (4). ISSN 1424-8220

Al-Nasrawi, Suhad Jabbar Hamed and Jaber, Zuha Ayad and Sami, Suha Mohammed and Al-Maula, Bushra Habeeb and Al-Hmedat, Sattar Jabbar Abdul-Zahra and Aljdaimi, Abtesam Imhemed and Haider, Julfikar (2021) Influence of artificial canal lubricants on the lifespan of One Curve file under static and dynamic test modes. Annals of Tropical Medicine and Public Health, 24 (2). ISSN 1755-6783

Hassaan, Muhammad and Junaid, Massab and Shahbaz, Tauheed and Illyas, Muhammad and Khan, Fahd Nawaz and Haider, Julfikar (2021) Nanomechanical response of pulsed tungsten inert gas welded titanium alloy by nanoindentation and atomic force microscopy. Journal of Materials Engineering and Performance, 30 (2). pp. 1490-1503. ISSN 1059-9495

Nur-A-Alam, Nur-A-Alam and Ahsan, Mominul and Based, Md Abdul and Haider, Julfikar (2021) Intelligent System for Vehicles Number Plate Detection and Recognition Using Convolutional Neural Networks. Technologies, 9 (1). p. 9.

Al-Nasrawi, Suhad Jabbar Hamed and Jaber, Zuha Ayad and Al-Quraine, Nibrass Talib and Aljdaimi, Abtesam Imhemed and Al-Hmedat, Sattar Jabbar Abdul-Zahra and Zidan, Saleh and Haider, Julfikar (2021) Impact of Peracetic Acid on The Dynamic Cyclic Fatigue of Heat-Treated Nickel-Titanium Rotary Endodontic Instrument. International Journal of Dentistry, 2021. ISSN 1687-8728

Abdulridha, Wasnaa M. and Hussain, Zainab T. and Jabor, Ashwaq A. and Haider, Julfikar (2021) Investigating the effect of Aluminum dopping on the structural, optical, electrical, and sensing properties of ZnO films. Advances in Materials and Processing Technologies. ISSN 2374-068X

Zidan, Saleh and Silikas, Nikolaos and Haider, Julfikar and Alhotan, Abdulaziz and Jahantigh, Javad and Yates, Julian (2020) Assessing Tensile Bond Strength between Denture Teeth and nano Zirconia Impregnated PMMA Denture Base. International Journal of Nanomedicine, 2020 (15). pp. 9611-9625. ISSN 1176-9114

Haider, Julfikar (2020) Studying the Effect of Adding Titanium Dioxide (TiO2) Nanoparticles on the Compressive Strength of Chemical and Heat-activated Acrylic Denture Base Resins. Advances in Materials and Processing Technologies. ISSN 2374-068X (In Press)

Ayad Jaber, Zuha and Jabbar Abdul-Zahra Al-Hmedat, Sattar and Hameed, Sarmad Adel and Al-Nasrawi, Suhad Jabbar Hamed and Aljdaimi, Abtesam Imhemed and Haider, Julfikar (2020) Effect of autoclave sterilisation and heat activated sodium hypochlorite irrigation on the performance of nickel-titanium rotary files against cyclic fatigue. Advances in Materials and Processing Technologies. pp. 1-13. ISSN 2374-068X

Rahimi, Masoumeh and Alghassi, Alireza and Ahsan, Mominul and Haider, Julfikar (2020) Deep Learning Model for Industrial Leakage Detection Using Acoustic Emission Signal. Informatics, 7 (4). p. 49.

Shahinur, Sweety and Hasan, Mahbub and Ahsan, Qumrul and Haider, Julfikar (2020) Effect of Chemical Treatment on Thermal Properties of Jute Fiber Used in Polymer Composites. Journal of Composites Science, 4 (3). p. 132.

Zidan, Saleh and Silikas, Nikolaos and Haider, Julfikar and Yates, Julian (2020) Effect of Cleansers on the Colour Stability of Zirconia Impregnated PMMA Bio-Nanocomposite. Nanomaterials, 10 (9). p. 1757. ISSN 2079-4991

Zidan, Saleh and Silikas, Nikolaos and Haider, Julfikar and Yates, Julian (2020) Long-Term Sorption and Solubility of Zirconia-Impregnated PMMA Nanocomposite in Water and Artificial Saliva. Materials, 13 (17). p. 3732.

Muhammad Sayem, Abu Sadat and Haider, Julfikar and Naveed, Bilal and Sayeed, MM Alamgir and Sashikumar, Sravanthi (2020) Thermoplastic Composites reinforced with Multi-layer Woven Jute Fabric: A Comparative Analysis. Advances in Materials and Processing Technologies. ISSN 2374-068X

Sarkar, Subhasish and Baranwal, Rishav Kumar and Mukherjee, Arghya and Koley, Ishita and Biswas, Chanchal and Haider, Julfikar and Majumdar, Gautam (2020) Optimisation & minimisation of corrosion rate of electroless Ni-Co-P coating. Advances in Materials and Processing Technologies, 6 (3). pp. 487-508. ISSN 2374-068X

Zidan, Saleh and Silikas, Nikolaos and Haider, Julfikar and Alhotan, Abdulaziz and Jahantigh, Javad and Yates, Julian (2020) Evaluation of Equivalent Flexural Strength for Complete Removable Dentures Made of Zirconia-Impregnated PMMA Nanocomposites. Materials, 13 (11). p. 2580. ISSN 1996-1944

Muhammad Sayem, Abu Sadat and Haider, Julfikar and Sayeed, MM Alamgir (2019) Development and characterisation of multilayer jute fabric reinforced HDPE composites. Journal of Composite Materials, 54 (14). p. 1785. ISSN 0021-9983

Sarkar, Subhasish and Baranwal, Rishav Kumar and Biswas, Chanchal and Majumdar, Gautam and Haider, Julfikar (2019) Optimization of process parameters for electroless Ni–Co–P coating deposition to maximize micro-hardness. Materials Research Express, 6 (4). ISSN 2053-1591

Khan, Fahd N and Junaid, Massab and Baig, Mirza Nadeem and Haider, Julfikar (2018) Response surface approach to minimize the residual stresses in full penetration pulsed TIG weldments of Ti-5Al-2.5Sn alloy. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. ISSN 0954-4062

Book Section

Sayeed, MM Alamgir and Muhammad Sayem, Abu Sadat and Haider, Julfikar and Habib, Md Mahmudul and Malik, Anubhav (2021) Re-use of Plastic Products–Materials Perspective. In: Reference Module in Materials Science and Materials Engineering. Elsevier B.V., Netherlands. ISBN 9780128035818

Shahinur, Sweety and Hasan, Mahbub and Haider, Julfikar (2021) Effect of Processing Techniques and Characteristics of Plastic Products. In: Reference Module in Materials Science and Materials Engineering. Elsevier. ISBN 9780128035818

Zerin, Israt and Farzana, Nawshin and Muhammad Sayem, Abu and Anang, Daniel M and Haider, Julfikar (2019) Potentials of Natural Dyes for Textile applications. In: Reference Module in Materials Science and Materials Engineering. Elsevier. ISBN 978-0-12-803581-8

Sayeed, MMA and Muhammad Sayem, Abu and Haider, Julfikar (2019) Opportunities with Renewable Jute Fibre Composites to Reduce Eco-impact of Non-renewable Polymers. In: Reference Module in Materials Science and Materials Engineering. Elsevier. ISBN 978-0-12-803581-8

Muhammad Sayem, Abu and Shahariar, Hasan and Haider, Julfikar (2019) An overview on the opportunities for 3D printing with bio-based materials. In: Reference Module in Materials Science and Materials Engineering. Elsevier, UK. ISBN 978-0-12-803581-8

Conference or Workshop Item

Haider, Julfikar and Petty, David and Tebboune, Sofiane and Kennedy, Ian (2018) Improving Efficiency in Food Manufacturing Operations and Systems. In: Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, 11 September 2018 - 13 September 2018, Skövde, Sweden.

Muhammad Sayem, AS and Haider, Julfikar and Sayeed, MM Alamgir (2018) Engineered Material from Natural Fibre for Interior Design Applications. In: The 91st Textile Institute World Conference: Integrating Design with Sustainable Technology, 23 July 2018 - 26 June 2018, University of Leeds, UK. (In Press)

This list was generated on Sat May 28 03:45:36 2022 BST.