Items where Author is "Haider, Julfikar"

Ahamed, Md Faysal, Nahiduzzaman, Md, Islam, Md Rabiul, Naznine, Mansura, Arselene Ayari, Mohamed, Khandakar, Amith and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Detection of various gastrointestinal tract diseases through a deep learning method with ensemble ELM and explainable AI. Expert Systems with Applications. ISSN 0957-4174

Sulaiman, Mira Mohideen, Fatalla, Abdalbseet Ahmad ORCID: https://orcid.org/0000-0001-5320-8559 and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) The Impact of Incorporating Grapefruit Seed Skin Particles into 3D-Printed Acrylic Resin on Mechanical Properties. Prosthesis, 6 (6). pp. 1420-1436.

Hu, Hongtao, Huang, Longkun, Xu, Biao, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Khan, Fahd Nawaz and Mao, Yangwu (2024) Microstructural characterizations of metallized Al2O3 before/after surface treatment and Al2O3/Cu soldered joint. Materials Characterization, 217. ISSN 1044-5803

(2024) Prediction of fetal brain gestational age using multihead attention with Xception. Computers in Biology and Medicine, 182. ISSN 0010-4825

Mhaibes, Anwr Hasan, Safi, Ihab Nabeel ORCID: https://orcid.org/0000-0002-1455-0439 and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) The influence of the addition of titanium oxide nanotubes on the properties of 3D printed denture base materials. Journal of Esthetic and Restorative Dentistry, 36 (11). pp. 1574-1590. ISSN 1496-4155

Hoque, Abdullah Mohammad Tanvirul ORCID: https://orcid.org/0000-0001-7243-1780, Altabatabaie, Kusay Faisal ORCID: https://orcid.org/0000-0002-6632-3596, Habib, Md Ahasan ORCID: https://orcid.org/0000-0001-7732-2639, Ahsan, Mominul ORCID: https://orcid.org/0000-0002-7300-506X and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Titanium-Coated Extremely Sensitive SPR Biosensor for Cancer Cell Detection. Journal of Sensors, 2024. ISSN 1687-7268

Mudhaffer, Shaymaa, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Satterthwaite, Julian and Silikas, Nick (2024) Effects of print orientation and artificial aging on the flexural strength and flexural modulus of 3D printed restorative resin materials. The Journal of Prosthetic Dentistry. ISSN 0022-3913

Aljafery, Ali Mohammad Ali ORCID: https://orcid.org/0000-0002-6545-800X, Fatalla, Abdalbseet A ORCID: https://orcid.org/0000-0001-5320-8559 and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Osseointegration and histopathological evaluation of titanium-titanium diboride composite compared to pure titanium implant materials prepared by powder metallurgy (in vivo study). Journal of Biomedical Materials Research Part B Applied Biomaterials, 112 (10). ISSN 1552-4973

Karim, Md Jawadul ORCID: https://orcid.org/0009-0006-4226-3652, Nahiduzzaman, Md, Ahsan, Mominul ORCID: https://orcid.org/0000-0002-7300-506X and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Development of an early detection and automatic targeting system for cotton weeds using an improved lightweight YOLOv8 architecture on an edge device. Knowledge-Based Systems, 300. ISSN 0950-7051

(2024) 3D-printed nanocomposite denture base resin: the effect of incorporating TiO2 nanoparticles on the growth of Candida albicans. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry, 33 (S1). pp. 25-34. ISSN 1059-941X

Hossain, Md Munawar ORCID: https://orcid.org/0009-0005-0314-0927, Islam, Md Robiul, Ahamed, Md Faysal ORCID: https://orcid.org/0000-0002-7014-3205, Ahsan, Mominul ORCID: https://orcid.org/0000-0002-7300-506X and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) A Collaborative Federated Learning Framework for Lung and Colon Cancer Classifications. Technologies, 12 (9).

Al-Johani, Hanan ORCID: https://orcid.org/0009-0006-3368-8712, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Satterthwaite, Julian ORCID: https://orcid.org/0000-0001-9731-3377, Borba, Marcia ORCID: https://orcid.org/0000-0001-7587-9839 and Silikas, Nick ORCID: https://orcid.org/0000-0003-4576-4584 (2024) A Comprehensive Review of the Multifaceted Characterisation Approaches of Dental Ceramics. Prosthesis, 6 (5). pp. 1055-1090.

(2024) The Effect of Gold Nanoparticles and Apricot Kernel Extract on the Osseointegration of Dental Implants - A Rabbit Model. The Open Dentistry Journal, 18 (1). ISSN 1874-2106

Babaier, Rua ORCID: https://orcid.org/0000-0001-9565-8275, Alhotan, Abdulaziz ORCID: https://orcid.org/0000-0002-9036-0485, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Silikas, Nick ORCID: https://orcid.org/0000-0003-4576-4584 and Watts, David C ORCID: https://orcid.org/0000-0002-9105-2775 (2024) Effects of two dentifrices on the surface properties and staining susceptibility of polymer-based materials. Journal of Prosthodontics: implant, esthetic, and reconstructive dentistry. ISSN 1059-941X

Altarazi, Ahmed ORCID: https://orcid.org/0000-0002-0537-8884, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Alhotan, Abdulaziz ORCID: https://orcid.org/0000-0002-9036-0485, Silikas, Nikolaos ORCID: https://orcid.org/0000-0003-4576-4584 and Devlin, Hugh ORCID: https://orcid.org/0000-0002-5120-747X (2024) Current Progress in the Development of Resin Materials with Nanofillers for 3D Printing of Denture Base. Prosthesis, 6 (4). pp. 770-797.

Farid, Farzaneh, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Shahab, Marjan Sadeghpour and Rezaeikalantari, Nika (2024) Selecting drill size for post space preparation based on final endodontic radiographs: An in vitro study. Technology and Health Care, 32 (4). pp. 2575-2583. ISSN 0928-7329

Karim, Md Jawadul, Goni, Md Omaer Faruq, Nahiduzzaman, Md, Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Kowalski, Marcin (2024) Enhancing agriculture through real-time grape leaf disease classification via an edge device with a lightweight CNN architecture and Grad-CAM. Scientific Reports, 14 (1).

Sherwin, Canute, Goudar, Dayanand M ORCID: https://orcid.org/0000-0002-0085-401X, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Pinto, Deesy G and Raju, K (2024) Effect of bath temperature on electroplating of nickel on a copper substrate. Transactions of the Institute of Metal Finishing, 102 (4). pp. 190-198. ISSN 0020-2967

Mudhaffer, Shaymaa, Althagafi, Rana, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Satterthwaite, Julian and Silikas, Nick (2024) Effects of printing orientation and artificial ageing on martens hardness and indentation modulus of 3D printed restorative resin materials. Dental Materials, 40 (7). pp. 1003-1014. ISSN 0109-5641

Altarazi, Ahmed ORCID: https://orcid.org/0000-0002-0537-8884, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Alhotan, Abdulaziz ORCID: https://orcid.org/0000-0002-9036-0485, Silikas, Nick ORCID: https://orcid.org/0000-0003-4576-4584 and Devlin, Hugh ORCID: https://orcid.org/0000-0002-5120-747X (2024) Impact of artificial aging on the physical and mechanical characteristics of denture base materials fabricated via 3D printing. International Journal of Biomaterials, 2024. ISSN 1687-8787

Runsewe, Ife, Latifi, Majid ORCID: https://orcid.org/0000-0002-2671-0516, Ahsan, Mominul ORCID: https://orcid.org/0000-0002-7300-506X and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Machine learning for predicting key factors to identify misinformation in football transfer news. Computers, 13 (6).

Al-Johani, Hanan, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Satterthwaite, Julian ORCID: https://orcid.org/0000-0001-9731-3377 and Silikas, Nick ORCID: https://orcid.org/0000-0003-4576-4584 (2024) Lithium silicate-based glass ceramics in dentistry: a narrative review. Prosthesis, 6 (3). pp. 478-505.

Aljafery, Ali Mohammad Ali ORCID: https://orcid.org/0000-0002-6545-800X, Fatalla, Abdalbseet A ORCID: https://orcid.org/0000-0001-5320-8559 and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Cytotoxicity, corrosion resistance, and wettability of titanium and Ti-TiB2 composite fabricated by powder metallurgy for dental implants. Metals, 14 (5).

Alamoush, Rasha A ORCID: https://orcid.org/0000-0002-5031-5081, Sartawi, Samiha ORCID: https://orcid.org/0000-0002-9043-8238, Salim, Nesreen A ORCID: https://orcid.org/0000-0002-5355-2269, Sawair, Faleh ORCID: https://orcid.org/0000-0003-1604-5206, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Jamani, Kifah (2024) Exam evaluation in prosthodontics across preclinical and clinical years from students' perspective: a cross-sectional study. European journal of dental education : official journal of the Association for Dental Education in Europe, 28 (2). pp. 663-672. ISSN 1396-5883

Singh, Swadesh Kumar, Tummala, Suresh Kumar ORCID: https://orcid.org/0000-0002-3155-073X, Kosaraju, Satyanarayana and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Editorial for the Special Issue on Multidisciplinary Composites. Journal of Composites Science, 8 (5).

Khaji, Saiyad Hasan, Goudar, Dayanand M ORCID: https://orcid.org/0000-0002-0085-401X, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Raju, K (2024) Microstructural features and mechanical properties of spray -formed hypereutectic Al-Si-Ti alloy. Advances in Materials and Processing Technologies. pp. 1-18. ISSN 2374-068X

Gangal, Krishnaraddi, Goudar, Dayanand M, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, K, Devendra and Kadi, Rajendrakumar V (2024) Effects of thermal ageing on the wear behavior of the cerium modified Al-18si-3.6cu alloy. Advances in Materials and Processing Technologies, 10 (2). pp. 1207-1225. ISSN 2374-068X

Al-Johani, Hanan, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Silikas, Nick ORCID: https://orcid.org/0000-0003-4576-4584 and Satterthwaite, Julian (2024) Effect of repeated firing on the topographical, optical, and mechanical properties of fully crystallized lithium silicate-based ceramics. The Journal of Prosthetic Dentistry, 131 (4). 741e.1-741.e11. ISSN 0022-3913

Nguyen, Ly, Ahsan, Mominul ORCID: https://orcid.org/0000-0002-7300-506X and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Reimagining peer-to-peer lending sustainability: unveiling predictive insights with innovative machine learning approaches for loan default anticipation. FinTech, 3 (1). pp. 184-215. ISSN 2674-1032

Hullur, Mahendra K, Goudar, Dayanand M, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Kori, SA (2024) Microstructural, Mechanical and Wear behavior of in-situ Al-TiB2 composites. Advances in Materials and Processing Technologies, 10 (3). pp. 2444-2459. ISSN 2374-068X

Goudar, Dayanand M, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Raju, K, Kurahatti, Rajashekar V and Pinto, Deesy G (2024) Influence of cu addition on the wear behavior of a eutectic Al–12.6Si alloy developed by the spray forming method. Journal of Composites Science, 8 (3). p. 88. ISSN 2504-477X

Evans, Marie-Therese Charlotte, Latifi, Majid ORCID: https://orcid.org/0000-0002-2671-0516, Ahsan, Mominul ORCID: https://orcid.org/0000-0002-7300-506X and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2024) Leveraging semantic text analysis to improve the performance of transformer-based relation extraction. Information, 15 (2). ISSN 2078-2489

Xu, Biao, Cai, Yuqi, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Khan, Fahd Nawaz, Shehbaz, Tauheed, Zhao, Hongyang and Mao, Yangwu (2024) Microstructural and Mechanical Characterizations of Mo/W and Mo/Graphite Joints with BNi2 Paste. Advanced Engineering Materials, 26 (1). ISSN 1438-1656

(2023) Evaluating the translucency, surface roughness, and cytotoxicity of a PMMA acrylic denture base reinforced with bioactive glasses. Journal of Functional Biomaterials, 15 (1). ISSN 2079-4983

Altarazi, Ahmed, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Alhotan, Abdulaziz, Silikas, Nick and Devlin, Hugh (2023) 3D printed denture base material: the effect of incorporating TiO2 nanoparticles and artificial ageing on the physical and mechanical properties. Dental Materials, 39 (12). pp. 1122-1136. ISSN 0109-5641

Ahamed, Md Faysal, Hossain, Md Munawar, Nahiduzzaman, Md, Islam, Md Rabiul, Islam, Md Robiul, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) A Review on Brain Tumor Segmentation Based on Deep Learning Methods with Federated Learning Techniques. Computerized Medical Imaging and Graphics. ISSN 0895-6111

Nur-A-Alam, Md, Nasir, Mostofa Kamal, Ahsan, Mominul, Based, Md Abdul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Kowalski, Marcin (2023) Ensemble classification of integrated CT scan datasets in detecting COVID-19 using feature fusion from contourlet transform and CNN. Scientific Reports, 13 (1). ISSN 2045-2322

Nur-A-Alam, Md, Nasir, Mostofa Kamal, Ahsan, Mominul, Based, Md Abdul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Palani, Sivaprakasam (2023) A faster RCNN based diabetic retinopathy detection method using fused features from retina images. IEEE Access, 11. pp. 124331-124349. ISSN 2169-3536

(2023) Parallel CNN-ELM: A Multiclass Classification of Chest X-Ray Images to Identify Seventeen Lung Diseases Including COVID-19. Expert Systems with Applications, 229 (A). ISSN 0957-4174

(2023) Plant Disease Classifier: detection of dual-crop diseases using lightweight 2D CNN architecture. IEEE Access, 11. pp. 110627-110643. ISSN 2169-3536

Ibrahim, Sabreen Waleed, Hamad, Thekra Ismael and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Biological properties of polycaprolactone and barium titanate composite in biomedical applications. Science Progress, 106 (4). pp. 1-31. ISSN 0036-8504

Fadhil, Enas, Dosh, Rasha H, Wally, Zena J and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Histological evaluation of the effects of bone morphogenetic protein 9 and angiopoietin 1 on bone healing. Journal of Taibah University Medical Sciences, 18 (5). pp. 954-963. ISSN 1658-3612

Roy, Probir Kumar, Shahjalal, Mohammad, Shams, Tamanna, Fly, Ashley, Stoyanov, Stoyan, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) A Critical Review on Battery Aging and State Estimation Technologies of Lithium-Ion Batteries: Prospects and Issues. Electronics, 12 (19).

Sarkar, Ovi, Islam, Md Robiul, Syfullah, Md Khalid, Islam, Md Tohidul, Ahamed, Md Faysal, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Multi-Scale CNN: An Explainable AI-Integrated Unique Deep Learning Framework for Lung-Affected Disease Classification. Technologies, 11 (5).

Vadivel, Srinivasan, Ramasamy, Sridhar, Mikkili, Suresh, Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Islam, Md Minarul and Ustun, Taha Selim (2023) Hybrid Social Grouping Algorithm-Perturb and Observe Power Tracking Scheme for Partially Shaded Photovoltaic Array. International Journal of Energy Research, 2023. p. 9905979. ISSN 0363-907X

Al-Fahham, Batool M, Mohamed, Rafeef Ahmed, Al-Talqani, Juman Mohammed Taqi, Fahad, Ali Hadi and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Evaluating Antimicrobial Effectiveness of Gold Nanoparticles against Streptococcus oralis. International Journal of Dentistry, 2023. p. 9935556. ISSN 1687-8728

(2023) Explainable deep learning model for automatic mulberry leaf disease classification. Frontiers in Plant Science, 14. p. 1175515. ISSN 1664-462X

Mustafa, Sameen, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Matteis, Paolo and Murtaza, Qasim (2023) Synthesis and Wear Behaviour Analysis of SiC- and Rice Husk Ash-Based Aluminium Metal Matrix Composites. Journal of Composites Science, 7 (9). ISSN 2504-477X

Alamoush, Rasha A, Yang, Jiawei, Alhotan, Abdulaziz, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Matinlinna, Jukka P and Elraggal, Alaaeldin (2023) The effect of in-office bleaching agents on the Vickers hardness and surface topography of polished and unpolished CAD/CAM composite materials. Scientific Reports, 13 (1). p. 15341. ISSN 2045-2322

Al-Johani, Hanan, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Silikas, Nick and Satterthwaite, Julian (2023) Effect of surface treatments on optical, topographical and mechanical properties of CAD/CAM reinforced lithium silicate glass ceramics. Dental Materials, 39 (9). pp. 779-789. ISSN 0109-5641

Alavandi, Mehabubsubahani R, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Goudar, Dayanand M (2023) Investigation of the influence of Ni and Cu additions on the wear behavior of spray formed Al-15Si alloy at elevated temperature. Silicon, 15 (14). pp. 5963-5980. ISSN 1876-990X

Aljafery, Ali Mohammad Ali, Fatalla, Abdalbseet A and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Powder metallurgy preparation and characterization of titanium-titanium diboride composite targeted for dental implant. Journal of Composites Science, 7 (9). p. 353. ISSN 2504-477X

Ibrahim, Salah M, Al-mizraqchi, Abass S and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Metronidazole Potentiation by Panax Ginseng and Symphytum officinale: A New Strategy for P. gingivalis Infection Control. Antibiotics, 12 (8). p. 1288.

Atallah, Hawraa Noori ORCID: https://orcid.org/0000-0002-9754-210X, Ali, Marwah Safaa ORCID: https://orcid.org/0000-0002-7372-8823, Abd Noor, Hussein Jameel ORCID: https://orcid.org/0000-0002-8931-0384, Sami, Suha Mohammad ORCID: https://orcid.org/0000-0002-0520-0912 and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Evaluation of the relation between the maxillary sinus and the posterior teeth using digital panoramic radiography. Journal of Medicine and Life, 16 (8). pp. 1240-1244. ISSN 1844-122X

Shehbaz, Tauheed, Junaid, Massab, Khan, Fahd, Zaigham, Hamid and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Relationship between microstructure and nanomechanical properties in Dissimilar Friction- Stir- Welded AA6061-T6 aluminum alloy and AISI 316 stainless steel. In: Reference Module in Materials Science and Materials Engineering. Elsevier. ISBN 9780128035818

(2023) Detection of various lung diseases including COVID-19 using extreme learning machine algorithm based on the features extracted from a lightweight CNN architecture. Biocybernetics and Biomedical Engineering, 43 (3). pp. 528-550. ISSN 0208-5216

Muhammad Sayem, Abu Sadat ORCID: https://orcid.org/0000-0003-3034-7892, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Uddin, Mohammad Abbas, Khan, Ayub Nabi, Sayeed, MM Alamgir and Hasan, Mahbub (2023) Framework for Environmentally Sustainable Fashion and Textile Production to achieve United Nation (UN) Sustainable Development Goal (SDG) 12. In: The 92nd Textile Institute World Conference (TIWC) 2023, 03 July 2023 - 06 July 2023, University of Huddersfield. (Unpublished)

Alhotan, Abdulaziz, Raszewski, Zbigniew, Alamoush, Rasha A, Chojnacka, Katarzyna, Mikulewicz, Marcin and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Influence of storing composite filling materials in a low-pH artificial saliva on their mechanical properties— an in vitro study. Journal of Functional Biomaterials, 14 (6). p. 328. ISSN 2079-4983

Mohandas, Alex, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Tactically Maximize Game Advantage by Predicting Football Substitutions Using Machine Learning. Big Data and Cognitive Computing, 7 (2). p. 117. ISSN 2504-2289

Chavan, Vijaykumar, Kurahatti, Rajashekar V, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Goudar, Dayanand M and Patil, Ishwargouda S (2023) Evaluating comparative wear behaviour of Al-15%Si based alloy/composites reinforced with zinc and zirconium oxide. Tribology: Materials, Surfaces and Interfaces, 17 (2). pp. 81-98. ISSN 1751-5831

El Lel, Tarik, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Detecting COVID-19 from Chest X-rays Using Convolutional Neural Network Ensembles. Computers, 12 (5). p. 105.

(2023) A real time method for distinguishing COVID-19 utilizing 2D-CNN and transfer learning. Sensors, 23 (9). p. 4458. ISSN 1424-8220

Nahiduzzaman, Md, Robiul Islam, Md, Omaer Faruq Goni, Md, Shamim Anower, Md, Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Kowalski, Marcin (2023) Diabetic Retinopathy Identification Using Parallel Convolutional Neural Network Based Feature Extractor and ELM Classifier. Expert Systems with Applications, 217. p. 119557. ISSN 0957-4174

(2023) Mechanical and tribological behavior of LM26/SiC/Ni-Gr hybrid composites. Journal of Composites Science, 7 (4). p. 159. ISSN 2504-477X

Ahmed, Amal Qasim, Al-Hmedat, Sattar Jabbar Abdul-Zahra, Hanweet, Dunya Malhan and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Assessing the antifungal activity of a soft denture liner loaded with titanium oxide nanoparticles (TiO2 NPs). Dentistry Journal, 11 (4). p. 90. ISSN 2304-6767

(2023) Fast and accurate fault detection and classification in transmission lines using extreme learning machine. e-Prime: Advances in Electrical Engineering, Electronics and Energy, 3. p. 100107. ISSN 2772-6711

(2023) Thermal analysis of Si-IGBT based power electronic modules in 50kW traction inverter application. e-Prime: Advances in Electrical Engineering, Electronics and Energy, 3. p. 100112. ISSN 2772-6711

Kadia, Rajendrakumar V, Dundurb, Suresh T, Goudar, Dayanand M and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Applying multi-response optimization for sustainable machining of 316 stainless steel with coconut oil assisted minimum quantity lubrication. Tribology: Materials, Surfaces and Interfaces, 17 (1). pp. 48-61. ISSN 1751-5831

Behera, Ajit, Saxena, Kuldeep, Prakash, Chander, Pramanik, Alokesh, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Basak, Animesh and Shankar, S (2023) Modeling and Simulation of Magnetron Sputterred NiTi Thin Film Deposition by SRIM/TRIM. Surface Review and Letters. ISSN 0218-625X

Al-Magsoosi, Mohanad Jameel Najm, Al-Asadi, Oras Kadhim Baqer, Al-Quraine, Nibrass Talib, Sami, Suha Mohammad and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Oral manifestations associated with COVID-19 infection: a cross-sectional study of recovered Iraqi patients. International Journal of Dentistry, 2023. p. 4288182. ISSN 1687-8728

Sayeed, MM Alamgir, Sayem, Abu Sadat Muhammad, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Akter, Sharmin, Habib, Md Mahmudul, Rahman, Habibur and Shahinur, Sweety (2023) Assessing Mechanical Properties of Jute, Kenaf, and Pineapple Leaf Fiber-Reinforced Polypropylene Composites: Experiment and Modelling. Polymers, 15 (4).

(2023) Kinetics of Oxygen Reduction Reaction of Polymer-Coated MWCNT-Supported Pt-Based Electrocatalysts for High-Temperature PEM Fuel Cell. Energies, 16 (3). p. 1537.

Cai, Yuqi, Xu, Biao, Ma, Xinjian, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Mao, Yangwu and Wang, Shenggao (2023) Bonding of graphite to Cu with metal multi-foils. Archives of Civil and Mechanical Engineering, 23 (1). p. 58. ISSN 1644-9665

Ramalingam, Senthil Rajan, Boopathi, CS, Ramasamy, Sridhar, Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Shahjalal, Mohammad (2023) A single-coil multi-tapped PDM-based induction heating system for domestic applications. Electronics, 12 (2). p. 404. ISSN 2079-9292

Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Hashmi, Saleem (2023) Current advancements and future perspectives in electronic materials for developing smart clothing. In: Encyclopedia of Materials: Electronics. Elsevier. ISBN 9780128197288 (hardback)

Ahsan, Mominul, Tasnim, Moshammed Nishat, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Shahjalal, Mohammad and Hashmi, Saleem (2023) Development in materials for manufacturing electronics with 3D printing. In: Encyclopedia of Materials: Electronics. Elsevier. ISBN 9780128197288 (hardback)

Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Hashmi, Saleem (2023) Development of conductive polymers as potential sensor material for Wearable Electronics. In: Encyclopedia of Materials: Electronics. Elsevier. ISBN 9780128197288 (hardback)

Hanoon, Zanbaq Azeez, Abdullah, Huda Abbas, Al-Ibraheemi, Zahraa Abdulaali, Alamoush, Rasha A, Sami, Suha Mohammad and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2023) Marginal Fit of Porcelain Laminate Veneer Materials under Thermocycling Condition: An In-Vitro Study. Dentistry Journal, 11 (1). ISSN 2304-6767

Ahsan, Mominul, Tasnim, Moshammed Nishat, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Shahjalal, Mohammad and Hashmi, Saleem (2023) Materials for developing future flexible electronic device. In: Encyclopedia of Materials: Electronics. Elsevier. ISBN 9780128197288 (hardback)

Altarazi, Ahmed, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Silikas, Nick and Devlin, Hugh (2022) Assessing the physical and mechanical properties of 3D printed acrylic material for denture base application. Dental Materials, 38 (12). pp. 1841-1854. ISSN 0109-5641

Shehbaz, Tauheed, Junaid, Massab, Khan, Fahd Nawaz and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Dissimilar P-TIG welding between Inconel 718 and commercially pure Titanium using niobium interlayer. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236 (6). pp. 2311-2324. ISSN 0954-4089

Babaier, Rua, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Silikas, Nick and Watts, David C (2022) Effect of CAD/CAM aesthetic material thickness and translucency on the polymerisation of light- and dual-cured resin cements. Dental Materials, 38 (12). pp. 2073-2083. ISSN 0109-5641

Aljafery, Ali M, Alkafagy, Mohammed, Wally, Zena J, Dheya, Athraa Mohammed, Almusawi, Raja’a M and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Studying the effect of using ultrasound vibration on the reproduction of detail and surface hardness of dental stone models. Nano Biomedicine and Engineering, 14 (3). pp. 263-271. ISSN 2150-5578

Arivendan, Ajithram, Thangiah, Winowlin Jappes Jebas, Basha, Adam khan Mahaboob, Chris, Brintha and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Studying mechanical, thermal and absorption, characteristics of water hyacinth (Eichhornia crassipes) plant fibre reinforced polymer composites. Journal of Natural Fibers, 19 (16). pp. 13958-13969. ISSN 1544-0478

Shahjalal, Mohammad, Shams, Tamanna, Tasnim, Moshammed Nishat, Ahmed, Md Rishad, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) A critical review on charging technologies of electric vehicles. Energies, 15 (21). p. 8239. ISSN 1996-1073

(2022) A novel hybrid approach to develop bioresorbable material. Journal of Orthopaedics, 34. pp. 61-66. ISSN 0972-978X

Shahriar, Saleh Mohammed, Bhuiyan, Erphan A, Nahiduzzaman, Md, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) State of Charge Estimation for Electric Vehicle Battery Management Systems Using the Hybrid Recurrent Learning Approach with Explainable Artificial Intelligence. Energies, 15 (21). ISSN 1996-1073

Kibria, Hafsa Binte, Nahiduzzaman, Md, Goni, Md Omaer Faruq, Ahsan, Mominul and Haider, Julfikar (2022) An ensemble approach for the prediction of diabetes mellitus using a soft voting classifier with an explainable AI. Sensors, 22 (19). p. 7268. ISSN 1424-8220

Ebenezer, George, Adam Khan, M, Chellaganesh, D, Winowlin Jappes J, T and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Assessing Machinability and Surface characteristics of a Shape Memory Alloy (SMA) Processed through Wire Electro Spark Erosion Method. Archives of Metallurgy and Materials, 67 (3). pp. 921-930. ISSN 1733-3490

Babaier, Rua S, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Alshabib, Abdulrahman, Silikas, Nick and Watts, David C (2022) Mechanical behaviour of prosthodontic CAD/CAM polymer composites aged in three food-simulating liquids. Dental Materials, 38 (9). pp. 1492-1506. ISSN 0109-5641

Abdullah, Huda Abbas, Al-Ibraheemi, Zahraa Abdulaali, Hanoon, Zanbaq Azeez and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Evaluation of shear bond strength of resin-based composites to Biodentine with three types of seventh-generation bonding agents: an in vitro study. International Journal of Dentistry, 2022. p. 2830299. ISSN 1687-8728

(2022) Applying supervised contrastive learning for the detection of diabetic retinopathy and its severity levels from fundus images. Computers in Biology and Medicine, 146. p. 105602. ISSN 0010-4825

(2022) A numerical thermal analysis of a battery pack in an electric motorbike application. Designs, 6 (4). p. 60. ISSN 2411-9660

Islam, Md Robiul, Nahiduzzaman, Md, Goni, Md Omaer Faruq, Sayeed, Abu, Anower, Md Shamim, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Explainable Transformer-Based Deep Learning Model for the Detection of Malaria Parasites from Blood Cell Images. Sensors, 22 (12).

Dwivedi, Pooja, Maheshwari, Sachin, Abidi, Mustufa Haider, Siddiquee, Arshad Noor, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Alkhalefah, Hisham (2022) Towards devising pilot experiments to establish parameter window for FSP of aluminum alloys. Advances in Mechanical Engineering, 14 (6). pp. 1-13. ISSN 1687-8132

(2022) Textile colouration with natural colourants: a review. Journal of Cleaner Production, 349. p. 131489. ISSN 0959-6526

Alhotan, Abdulaziz, Elraggal, Alaaeldin, Yates, Julian, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Jurado, Carlos Alberto and Silikas, Nikolaos (2022) Effect of Different Solutions on the Colour Stability of Nanoparticles or Fibre Reinforced PMMA. Polymers, 14 (8).

Abdulridha, Wasnaa M, Hussain, Zainab T, Jabor, Ashwaq A and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Investigating the effect of Aluminum dopping on the structural, optical, electrical, and sensing properties of ZnO films. Advances in Materials and Processing Technologies, 8 (2). pp. 1715-1727. ISSN 2374-068X

Shahinur, Sweety, Sayeed, MM Alamgir, Hasan, Mahbub, Sayem, Abu Sadat Muhammad, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Ura, Sharifu (2022) Current development and future perspective on natural jute fibers and their biocomposites. Polymers, 14 (7). p. 1445.

Vadivel, Srinivasan, Sengodan, Boopathi C, Ramasamy, Sridhar, Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Rodrigues, Eduardo MG (2022) Social Grouping Algorithm Aided Maximum Power Point Tracking Scheme for Partial Shaded Photovoltaic Array. Energies, 15 (6). p. 2105.

Aljafery, Ali M, Al-Jubouri, Ola M, Wally, Zena J, Almusawi, Rajaa M, Abdulrudha, Noor H and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) The Effects of Incorporating Ag-Zn Zeolite on the Surface Roughness and Hardness of Heat and Cold Cure Acrylic Resins. Journal of Composites Science, 6 (3). p. 85.

Aresh, Balaji, Khan, Fahd N and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Experimental investigation and numerical simulation of chip formation mechanisms in cutting rock-like materials. Journal of Petroleum Science and Engineering, 209. p. 109869. ISSN 0920-4105

Shehbaz, Tauheed, Khan, Fahd Nawaz, Junaid, Massab and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Investigating the bonding mechanism of P-TIG welded CpTi/Inconel 718 dissimilar joint with Nb interlayer. Materials Letters, 313. ISSN 0167-577X

Ayad Jaber, Zuha, Jabbar Abdul-Zahra Al-Hmedat, Sattar, Hameed, Sarmad Adel, Al-Nasrawi, Suhad Jabbar Hamed, Aljdaimi, Abtesam Imhemed and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2022) Effect of autoclave sterilisation and heat activated sodium hypochlorite irrigation on the performance of nickel-titanium rotary files against cyclic fatigue. Advances in Materials and Processing Technologies, 8 (1). pp. 1071-1083. ISSN 2374-068X

Abdulridha, Wasna’a M, Almusawi, Raja’a M, Al-Jubouri, Ola M, Wally, Zena J, Zidan, Saleh, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Al-Quraine, Nibrass T (2022) Studying the Effect of Adding Titanium Dioxide (TiO2) Nanoparticles on the Compressive Strength of Chemical and Heat-activated Acrylic Denture Base Resins. Advances in Materials and Processing Technologies, 8 (1). pp. 1058-1070. ISSN 2374-068X

Muhammad Sayem, Abu Sadat ORCID: https://orcid.org/0000-0003-3034-7892, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Naveed, Bilal, Sayeed, MM Alamgir and Sashikumar, Sravanthi (2022) Thermoplastic Composites reinforced with Multi-layer Woven Jute Fabric: A Comparative Analysis. Advances in Materials and Processing Technologies, 8 (1). pp. 355-379. ISSN 2374-068X

(2022) Antimicrobial effect of Red Roselle (Hibiscus Sabdariffa) against different types of oral bacteria. Journal of medicine and life, 15 (1). pp. 89-97. ISSN 1844-3117

Al-Mussawi, Raja M, Farid, Farzaneh and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Effect of Die Materials on Marginal and Internal Adaptation of Zirconia Copings: An In Vitro Study. The Open Dentistry Journal, 15 (1). pp. 708-716. ISSN 1874-2106

(2021) 2D Nanomaterial-Based Hybrid Structured (Au-WSe2-PtSe2-BP) Surface Plasmon Resonance (SPR) Sensor With Improved Performance. IEEE Access, 10. pp. 689-698. ISSN 2169-3536

Alhotan, Abdulaziz, Yates, Julian, Zidan, Saleh, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Jurado, Carlos Alberto and Silikas, Nikolaos (2021) Behaviour of PMMA Resin Composites Incorporated with Nanoparticles or Fibre following Prolonged Water Storage. Nanomaterials, 11 (12). p. 3453.

Ramalingam, Senthil Rajan, Boopthi, CS, Ramasamy, Sridhar, Ahsan, Mominul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Induction Heating for Variably Sized Ferrous and Non-Ferrous Materials through Load Modulation. Energies, 14 (24). p. 8354.

Abass, Abeer Abdulridha, Abdulridha, Wasna’a Mohammed, Alaarage, Warood Kream, Abdulrudha, Noor Hassan and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Evaluating the antibacterial effect of cobalt nanoparticles against multi-drug resistant pathogens. Journal of medicine and life, 14 (6). pp. 823-833. ISSN 1844-122X

Sayeed, MM Alamgir, Muhammad Sayem, Abu Sadat ORCID: https://orcid.org/0000-0003-3034-7892, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Habib, Md Mahmudul and Malik, Anubhav (2021) Re-use of Plastic Products–Materials Perspective. In: Reference Module in Materials Science and Materials Engineering. Elsevier B.V., Netherlands. ISBN 9780128035818

Shahinur, Sweety, Hasan, Mahbub and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Effect of Processing Techniques and Characteristics of Plastic Products. In: Reference Module in Materials Science and Materials Engineering. Elsevier. ISBN 9780128035818

(2021) A Novel Method for Multivariant Pneumonia Classification based on Hybrid CNN-PCA Based Feature Extraction using Extreme Learning Machine with Chest X-Ray Images. IEEE Access, 9. pp. 147512-147526. ISSN 2169-3536

Muhammad Sayem, AS, Haider, Julfikar and Sayeed, MM Alamgir (2021) Engineered Material from Natural Fibre for Interior Design Applications. In: The 91st Textile Institute World Conference: Integrating Design with Sustainable Technology, 23 July 2018 - 26 June 2018, University of Leeds, UK.

Mollah, Md Aslam, Sarker, Hasan, Ahsan, Mominul, Elahi, Md Towfik, Based, Md Abdul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Palani, Sivaprakasam (2021) Designing Highly Sensitive Surface Plasmon Resonance Sensor With Dual Analyte Channels. IEEE Access, 9. pp. 139293-139302.

Vadivel, Srinivasan, Boopthi, CS, Ramasamy, Sridhar, Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Rodrigues, Eduardo MG (2021) Performance Enhancement of a Partially Shaded Photovoltaic Array by Optimal Reconfiguration and Current Injection Schemes. Energies, 14 (19).

Junaid, Massab, Khan, Fahd Nawaz, Shahbaz, Tauheed, Saleem, Haris and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Influence of filler on the microstructure, mechanical properties and residual stresses in TIG weldments of dissimilar titanium alloys. Acta Metallurgica Sinica (English Letters), 34 (10). pp. 1395-1406. ISSN 1006-7191

Shehbaz, Tauheed, Khan, Fahd Nawaz, Junaid, Massab and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Investigating Nanoindentation Creep Behavior of Pulsed-TIG Welded Inconel 718 and Commercially Pure Titanium Using a Vanadium Interlayer. Metals, 11 (9).

Ahmed, Kawsar, Hasan, Mahbub and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Electrical and Mechanical Properties of Sugarcane Bagasse Pyrolyzed Biochar Reinforced Polyvinyl Alcohol Biocomposite Films. Journal of Composites Science, 5 (9).

Al-Maula, Bushra Habeeb, Wally, Zena J, Dosh, Rasha H, Aljdaimi, Abtesam Imhemed, Al-Nasrawi, Suhad Jabbar Hamed and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Assessing the Effects of Administering Calcium Oxide Nanoparticles on Oral Mucosa and Tongue of Male Wister Rats. Nano Biomedicine and Engineering, 13 (3). pp. 311-320. ISSN 2150-5578

Alam, Nur-A, Ahsan, Md Mominul, Based, Md Abdul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Kowalski, Marcin (2021) An Intelligent System for Automatic Fingerprint Identification using Feature Fusion by Gabor Filter and Deep Learning. Computers and Electrical Engineering, 95. ISSN 0045-7906

Al-ibraheemi, Zahraa Abdulaali, Abdullah, Huda Abbas, Jawad, Nada Abdlameer and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Assessing Fracture Resistance of Restored Premolars with Novel Composite Materials: An In Vitro Study. International Journal of Dentistry, Volume. ISSN 1687-8728

Shahinur, Sweety, Hasan, Mahbub, Ahsan, Qumrul, Sultana, Nayer, Ahmed, Zakaria and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Effect of Rot-, Fire-, and Water-Retardant Treatments on Jute Fiber and Their Associated Thermoplastic Composites: A Study by FTIR. Polymers, 13 (15). ISSN 2073-4360

(2021) Studying Effects of Calcium Oxide Nanoparticles on Dentinogenesis in Male Wistar Rats. International Journal of Dentistry, 2021. pp. 1-9. ISSN 1687-8728

Alhotan, Abdulaziz, Yates, Julian, Zidan, Saleh, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Silikas, Nikolaos (2021) Assessing Fracture Toughness and Impact Strength of PMMA Reinforced with Nano-Particles and Fibre as Advanced Denture Base Materials. Materials, 14 (15). ISSN 1996-1944

Chandran, Ilambirai Raghavan, Ramasamy, Sridhar, Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Rodrigues, Eduardo MG (2021) Implementation of Non-Isolated Zeta-KY Triple Port Converter for Renewable Energy Applications. Electronics, 10 (14).

Sakib, Nazmus, Ahmad, Rodina Binti, Ahsan, Mominul, Based, Md Abdul, Haruna, Khalid, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Gurusamy, Saravanakumar (2021) A Hybrid Personalized Scientific Paper Recommendation Approach Integrating Public Contextual Metadata. IEEE Access, 9. pp. 83080-83091.

Zidan, Saleh, Silikas, Nikolaos, Al-Nasrawi, Suhad, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Alshabib, Abdulrahman, Alshame, Alshame and Yates, Julian (2021) Chemical Characterisation of Silanised Zirconia Nanoparticles and Their Effects on the Properties of PMMA-Zirconia Nanocomposites. Materials, 14 (12).

Zidan, Saleh, Silikas, Nikolaos, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Jahantigh, Javad, Alhareb, Ahmed and Yates, Julian (2021) Evaluating Polishability of Zirconia Impregnated PMMA Nanocomposite for Denture Base Application. Symmetry, 13 (6).

Alhotan, Abdulaziz, Yates, Julian, Zidan, Saleh, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Silikas, Nikolaos (2021) Flexural Strength and Hardness of Filler-Reinforced PMMA Targeted for Denture Base Application. Materials, 14 (10).

Panati, Poornima Udaychandra, Ramasamy, Sridhar, Ahsan, Mominul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Rodrigues, Eduardo MG (2021) Indirect Effective Controlled Split Source Inverter-Based Parallel Active Power Filter for Enhancing Power Quality. Electronics, 10 (8).

Mustafa, Ruba, Al Omari, Taher, Al-Nasrawi, Suhad, Al Fodeh, Rami, Dkmak, Alaa and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Evaluating in-Vitro Performance of Novel Nickel-Titanium Rotary System (TruNatomy) based on debris extrusion and preparation time from Severely Curved Canals. Journal of Endodontics, 47 (6). pp. 976-981. ISSN 0099-2399

Alam, Nur-A, Ahsan, Mominul, Based, Md Abdul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Rodrigues, Eduardo MG (2021) Smart Monitoring and Controlling of Appliances using LoRa Based IoT System. Designs, 5 (1). ISSN 2411-9660

Jahan, N, Rahman, MD M, Ahsan, Mominul, Based, Md Abdul, Rana, MM, Gurusamy, Saravanakumar and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Photonic Crystal Fiber Based Biosensor for Pseudomonas Bacteria Detection: A Simulation Study. IEEE Access, 9. pp. 42206-42215. ISSN 2169-3536

Alam, Nur-A, Ahsan, Md Mominul, Based, Md Abdul, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Kowalski, Marcin (2021) COVID-19 Detection from Chest X-Ray images using Feature Fusion and Deep learning. Sensors, 21 (4). ISSN 1424-8220

Al-Nasrawi, Suhad Jabbar Hamed, Jaber, Zuha Ayad, Sami, Suha Mohammed, Al-Maula, Bushra Habeeb, Al-Hmedat, Sattar Jabbar Abdul-Zahra, Aljdaimi, Abtesam Imhemed and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Influence of artificial canal lubricants on the lifespan of One Curve file under static and dynamic test modes. Annals of Tropical Medicine and Public Health, 24 (2). ISSN 1755-6783

Hassaan, Muhammad, Junaid, Massab, Shahbaz, Tauheed, Illyas, Muhammad, Khan, Fahd Nawaz and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Nanomechanical response of pulsed tungsten inert gas welded titanium alloy by nanoindentation and atomic force microscopy. Journal of Materials Engineering and Performance, 30 (2). pp. 1490-1503. ISSN 1059-9495

Nur-A-Alam, Nur-A-Alam, Ahsan, Mominul, Based, Md Abdul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Intelligent System for Vehicles Number Plate Detection and Recognition Using Convolutional Neural Networks. Technologies, 9 (1). p. 9.

Al-Nasrawi, Suhad Jabbar Hamed, Jaber, Zuha Ayad, Al-Quraine, Nibrass Talib, Aljdaimi, Abtesam Imhemed, Al-Hmedat, Sattar Jabbar Abdul-Zahra, Zidan, Saleh and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2021) Impact of Peracetic Acid on The Dynamic Cyclic Fatigue of Heat-Treated Nickel-Titanium Rotary Endodontic Instrument. International Journal of Dentistry, 2021. ISSN 1687-8728

Zidan, Saleh, Silikas, Nikolaos, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Alhotan, Abdulaziz, Jahantigh, Javad and Yates, Julian (2020) Assessing Tensile Bond Strength between Denture Teeth and nano Zirconia Impregnated PMMA Denture Base. International Journal of Nanomedicine, 2020 (15). pp. 9611-9625. ISSN 1176-9114

Rahimi, Masoumeh, Alghassi, Alireza, Ahsan, Mominul ORCID: https://orcid.org/0000-0002-7300-506X and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2020) Deep Learning Model for Industrial Leakage Detection Using Acoustic Emission Signal. Informatics, 7 (4). p. 49.

Shahinur, Sweety, Hasan, Mahbub, Ahsan, Qumrul and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2020) Effect of Chemical Treatment on Thermal Properties of Jute Fiber Used in Polymer Composites. Journal of Composites Science, 4 (3).

Zidan, Saleh, Silikas, Nikolaos, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Yates, Julian (2020) Effect of Cleansers on the Colour Stability of Zirconia Impregnated PMMA Bio-Nanocomposite. Nanomaterials, 10 (9). p. 1757. ISSN 2079-4991

Zidan, Saleh, Silikas, Nikolaos, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Yates, Julian (2020) Long-Term Sorption and Solubility of Zirconia-Impregnated PMMA Nanocomposite in Water and Artificial Saliva. Materials, 13 (17).

Sarkar, Subhasish, Baranwal, Rishav Kumar, Mukherjee, Arghya, Koley, Ishita, Biswas, Chanchal, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Majumdar, Gautam (2020) Optimisation & minimisation of corrosion rate of electroless Ni-Co-P coating. Advances in Materials and Processing Technologies, 6 (3). pp. 487-508. ISSN 2374-068X

Zidan, Saleh, Silikas, Nikolaos, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285, Alhotan, Abdulaziz, Jahantigh, Javad and Yates, Julian (2020) Evaluation of Equivalent Flexural Strength for Complete Removable Dentures Made of Zirconia-Impregnated PMMA Nanocomposites. Materials, 13 (11). p. 2580. ISSN 1996-1944

Muhammad Sayem, Abu Sadat ORCID: https://orcid.org/0000-0003-3034-7892, Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 and Sayeed, MM Alamgir (2019) Development and characterisation of multilayer jute fabric reinforced HDPE composites. Journal of Composite Materials, 54 (14). p. 1785. ISSN 0021-9983

Zerin, Israt, Farzana, Nawshin, Muhammad Sayem, Abu ORCID: https://orcid.org/0000-0003-3034-7892, Anang, Daniel M ORCID: https://orcid.org/0000-0002-9743-0749 and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2019) Potentials of Natural Dyes for Textile applications. In: Reference Module in Materials Science and Materials Engineering. Elsevier. ISBN 978-0-12-803581-8

Sayeed, MMA, Muhammad Sayem, Abu ORCID: https://orcid.org/0000-0003-3034-7892 and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2019) Opportunities with Renewable Jute Fibre Composites to Reduce Eco-impact of Non-renewable Polymers. In: Reference Module in Materials Science and Materials Engineering. Elsevier. ISBN 978-0-12-803581-8

Muhammad Sayem, Abu ORCID: https://orcid.org/0000-0003-3034-7892, Shahariar, Hasan and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2019) An overview on the opportunities for 3D printing with bio-based materials. In: Reference Module in Materials Science and Materials Engineering. Elsevier, UK. ISBN 978-0-12-803581-8

Khan, Fahd N, Junaid, Massab, Baig, Mirza Nadeem and Haider, Julfikar (2019) Response surface approach to minimize the residual stresses in full penetration pulsed TIG weldments of Ti-5Al-2.5Sn alloy. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 233 (8). pp. 2778-2793. ISSN 0954-4062

Muhammad Sayem, Abu ORCID: https://orcid.org/0000-0003-3034-7892 and Haider, Julfikar ORCID: https://orcid.org/0000-0001-7010-8285 (2019) An Overview on the Development of Natural Renewable Materials for Textile Applications. In: Reference Module in Materials Science and Materials Engineering. Elsevier Ltd, The Netherlands. ISBN 978-0-12-803581-8

Sarkar, Subhasish, Baranwal, Rishav Kumar, Biswas, Chanchal, Majumdar, Gautam and Haider, Julfikar (2019) Optimization of process parameters for electroless Ni–Co–P coating deposition to maximize micro-hardness. Materials Research Express, 6 (4). ISSN 2053-1591

Haider, Julfikar, Petty, David, Tebboune, Sofiane and Kennedy, Ian (2018) Improving Efficiency in Food Manufacturing Operations and Systems. In: Advances in Manufacturing Technology XXXII: Proceedings of the 16th International Conference on Manufacturing Research, incorporating the 33rd National Conference on Manufacturing Research, 11 September 2018 - 13 September 2018, Skövde, Sweden.