Items where Author is "Kelly, PJ"

Article

Kulczyk-Malecka, J ORCID: https://orcid.org/0000-0002-4905-3635, Santos, IVJD, Betbeder, M, Rowley-Neale, SJ, Gao, Z and Kelly, PJ (2021) Low-temperature synthesis of vertically aligned graphene through microwave-assisted chemical vapour deposition. Thin Solid Films, 733. p. 138801. ISSN 0040-6090

Capp, SC, Sawtell, DAG, Banks, CE, Kelly, PJ and Abd-Allah, Z (2021) The effect of TiO2 coatings on the formation of ozone and nitrogen oxides in non-thermal atmospheric pressure plasma. Journal of Environmental Chemical Engineering, 9 (5). ISSN 2213-3437

Shaw, D, Kulczyk-Malecka, J ORCID: https://orcid.org/0000-0002-4905-3635, Kelly, PJ and Doyle, AM (2021) Methane oxidation over supported Pd catalysts prepared by magnetron sputtering. Surface and Coatings Technology, 414. ISSN 0257-8972

Evans, A, Slate, AJ, Akhidime, ID, Verran, J ORCID: https://orcid.org/0000-0002-5539-6896, Kelly, PJ and Whitehead, KA (2021) The removal of meat exudate and escherichia coli from stainless steel and titanium surfaces with irregular and regular linear topographies. International Journal of Environmental Research and Public Health, 18 (6). ISSN 1660-4601

Grao, M, Redfern, J ORCID: https://orcid.org/0000-0003-0958-683X, Kelly, PJ and Ratova, M (2021) Magnetron co-sputtered Bi12TiO20/Bi4Ti3O12 composite – An efficient photocatalytic material with photoinduced oxygen vacancies for water treatment application. Applied Surface Science, 552. ISSN 0169-4332

Ratova, M, Sawtell, D ORCID: https://orcid.org/0000-0002-3992-6850 and Kelly, PJ ORCID: https://orcid.org/0000-0003-1008-4941 (2020) Micro-patterning of magnetron sputtered titanium dioxide coatings and their efficiency for photocatalytic applications. Coatings, 10 (1).

Ratova, M, Tosheva, L, Kelly, PJ ORCID: https://orcid.org/0000-0003-1008-4941 and Ohtani, B (2019) Characterisation and properties of visible light-active bismuth oxide-titania composite photocatalysts. Sustainable Materials and Technologies, 22. e00112. ISSN 2214-9937

Vishnyakov, V, Kelly, PJ, Humblot, J, Kriek, RJ, Allen, NS and Mahdjoub, N (2018) Use of ion-assisted sputtering technique for producing photocatalytic titanium dioxide thin films: Influence of thermal treatments on structural and activity properties based on the decomposition of stearic acid. Polymer Degradation and Stability, 157. pp. 1-8. ISSN 0141-3910

García-Miranda Ferrari, A, Foster, CW, Kelly, PJ, Brownson, DAC and Banks, CE (2018) Determination of the Electrochemical Area of Screen-Printed Electrochemical Sensing Platforms. Biosensors, 8 (2). p. 53. ISSN 2079-6374

Allen, NS, Mahdjoub, N, Vishnyakov, V, Kelly, PJ and Kriek, RJ (2018) The effect of crystalline phase (anatase, brookite and rutile) and size on the photocatalytic activity of calcined polymorphic titanium dioxide (TiO2). Polymer Degradation and Stability, 150. pp. 31-36. ISSN 0141-3910

Kamieniak, J, Kelly, PJ, Doyle, AM and Banks, CE (2018) Influence of the metal/metal oxide redox cycle on the catalytic activity of methane oxidation over Pd and Ni doped hydroxyapatite. Catalysis Communications, 107. pp. 82-86. ISSN 1566-7367

Kamieniak, J, Kelly, PJ, Banks, CE and Doyle, AM (2017) Methane emission management in a dual-fuel engine exhaust using Pd and Ni hydroxyapatite catalysts. Fuel, 208. pp. 314-320. ISSN 0016-2361

Ratova, M, Klaysri, R, Praserthdam, P and Kelly, PJ (2017) Pulsed DC magnetron sputtering deposition of crystalline photocatalytic titania coatings at elevated process pressures. Materials Science in Semiconductor Processing, 71. pp. 188-196. ISSN 1369-8001

Kamieniak, J, Bernalte, E, Doyle, AM, Kelly, PJ and Banks, CE (2017) Can Ultrasound or pH Influence Pd Distribution on the Surface of HAP to Improve Its Catalytic Properties in the Dry Reforming of Methane? Catalysis Letters, 147 (8). pp. 2200-2208. ISSN 1011-372X

Sawtell, DAG, Abd-Allah, Z, Bradley, JW, West, GT and Kelly, PJ (2017) Mechanisms of atmospheric pressure plasma treatment of BOPP. Plasma Processes and Polymers, 15 (1). ISSN 1612-8850

Kamieniak, J, Doyle, AM, Kelly, PJ and Banks, CE (2017) Novel synthesis of mesoporous hydroxyapatite using carbon nanorods as a hard-template. Ceramics International, 43 (7). pp. 5412-5416. ISSN 0272-8842

Ratova, M, Kelly, PJ and West, GT (2017) Superhydrophobic photocatalytic PTFE – titania coatings deposited by reactive pDC magnetron sputtering from a blended powder target. Materials Chemistry and Physics, 190. pp. 108-113. ISSN 0254-0584

Kamieniak, J, Bernalte, E, Foster, CW, Doyle, AM, Kelly, PJ and Banks, CE (2016) High yield synthesis of hydroxyapatite (HAP) and Palladium Doped HAP via a wet chemical synthetic route. Catalysts, 6 (8). ISSN 2073-4344

Ratova, M, Kelly, PJ, West, GT and Tosheva, L (2016) A Novel Technique for the Deposition of Bismuth Tungstate onto Titania Nanoparticulates for Enhancing the Visible Light Photocatalytic Activity. Coatings, 6 (3). ISSN 2079-6412

Ratova, M, Kelly, PJ, West, GT, Xia, X and Gao, Y (2016) Deposition of Visible Light Active Photocatalytic Bismuth Molybdate Thin Films by Reactive Magnetron Sputtering. Materials, 9 (2). ISSN 0261-3069

Abd-Allah, Z, Sawtell, DAG, West, GT, Kelly, PJ and Bradley, JW (2015) Mass Spectrometric Observations of the Ionic Species in a Double Dielectric Barrier Discharge Operating in Nitrogen. Plasma Processes and Polymers, 13 (6). pp. 649-653. ISSN 1612-8850

Rowley-Neale, SJ, Brownson, DAC, Smith, GC, Sawtell, DAG, Kelly, PJ and Banks, CE (2015) 2D nanosheet molybdenum disulphide (MoS2) modified electrodes explored towards the hydrogen evolution reaction. NANOSCALE, 7. ISSN 2040-3364

Bradley, JW, Mishra, A and Kelly, PJ (2015) The effect of changing the magnetic field strength on HiPIMS deposition rates. Journal of Physics D: Applied Physics, 48. ISSN 0022-3727

Brownson, DAC, Kelly, PJ and Banks, CE (2015) In situ electrochemical characterisation of graphene and various carbon-based electrode materials: an internal standard approach. RSC Advances, 5. ISSN 2046-2069

Ratova, M, West, GT and Kelly, PJ (2015) Photocatalytic visible-light active bismuth tungstate coatings deposited by reactive magnetron sputtering. Vacuum, 115. ISSN 0042-207X

Abd-Allah, Z, Sawtell, DAG, McKay, K, West, GT, Kelly, PJ and Bradley, JW (2015) Mass spectrometric investigation of the ionic species in a dielectric barrier discharge operating in helium-water vapour mixtures. Journal of Physics D: Applied Physics, 48. ISSN 0022-3727

Ratova, M, West, GT, Kelly, PJ, Xia, X and Gao, Y (2014) Synergistic effect of doping with nitrogen and molybdenum on the photocatalytic properties of thin titania films. Vacuum, 114. ISSN 0042-207X

Kelly, PJ, West, GT, Ratova, M, Fisher, L, Ostovarpour, S and Verran, J (2014) Structural Formation and Photocatalytic Activity of Magnetron Sputtered Titania and Doped-Titania Coatings. MOLECULES, 19. ISSN 1420-3049

Ratova, M, West, GT and Kelly, PJ (2014) Visible light activated photocatalytic TaON coatings deposited via pulsed-DC magnetron sputtering. Vacuum, 109. ISSN 0042-207X

Struller, CF, Kelly, PJ and Copeland, NJ (2014) Aluminum oxide barrier coatings on polymer films for food packaging applications. Surface and Coatings Technology, 241. ISSN 0257-8972

Ratova, M, West, GT and Kelly, PJ (2014) Optimisation of HiPIMS photocatalytic titania coatings for low temperature deposition. Surface and Coatings Technology, 250. ISSN 0257-8972

Kulczyk-Malecka, J, Kelly, PJ, West, G, G C B, C and Ridealgh, JA (2013) Diffusion studies in magnetron sputter deposited silicon nitride films. Surface and Coatings Technology, 255. ISSN 0257-8972

Ratova, M, West, GT and Kelly, PJ (2013) HiPIMS deposition of tungsten-doped titania coatings for photocatalytic applications. Vacuum, 102. ISSN 0042-207X

Struller, CF, Kelly, PJ, Copeland, NJ, Tobin, V, Assender, HE, Holliday, CW and Read, SJ (2013) Aluminium oxide barrier films on polymeric web and their conversion for packaging applications. Thin Solid Films, 553. ISSN 0040-6090

Swindells, I, Kelly, PJ and Bradley, JW (2006) Influence of substrate conditions on the temporal behaviour of plasma parameters in a pulsed dc magnetron discharge. New Journal of Physics, 8 (4). p. 47. ISSN 1367-2630