Browse by Author

Article

Liao, Yayyao, Zhao, Wenbo, Feng, Jiling ORCID: https://orcid.org/0000-0001-5581-0623 and Lian, Zisheng (2024) Optimization of the control performance of a novel 3/2 water proportional directional valve with a special position following servo mechanism. IEEE/ASME Transactions on Mechatronics, 29 (5). pp. 3391-3400. ISSN 1083-4435

Meng, C ORCID: https://orcid.org/0000-0001-5540-553X Song, J ORCID: https://orcid.org/0000-0002-7689-1722 Malekmohammadi, S Meng, J Wei, W Li, R ORCID: https://orcid.org/0000-0002-3674-7777 Feng, J ORCID: https://orcid.org/0000-0001-5581-0623 et al.

Meng, C ORCID: https://orcid.org/0000-0001-5540-553X, Song, J ORCID: https://orcid.org/0000-0002-7689-1722, Malekmohammadi, S, Meng, J, Wei, W, Li, R ORCID: https://orcid.org/0000-0002-3674-7777, Feng, J ORCID: https://orcid.org/0000-0001-5581-0623, Hugh Gong, R and Li, J ORCID: https://orcid.org/0000-0001-7333-5280

Abdulsalam, M, Feng, J ORCID: https://orcid.org/0000-0001-5581-0623, Garrard, R, Attallah, MM, Serracino-Inglott, F and Zhao, L (2022) In vitro study of the deployment performance of 3D printed stents in the diseased artery with the lipid arterial plaques. Procedia Structural Integrity, 42. pp. 608-613. ISSN 2452-3216

Jamshidi, Parastoo, Panwisawas, Chinnapat, Langi, Enzoh, Cox, Sophie C, Feng, Jiling ORCID: https://orcid.org/0000-0001-5581-0623, Zhao, Liguo and Attallah, Moataz M (2022) Development, characterisation, and modelling of processability of nitinol stents using laser powder bed fusion. Journal of Alloys and Compounds, 909. p. 164681. ISSN 0925-8388

He, R, Zhao, L, Silberschmidt, VV, Feng, J and Serracino-Inglott, F (2022) Personalised nitinol stent for focal plaques: Design and evaluation. Journal of Biomechanics, 130. p. 110873. ISSN 0021-9290

Feng, J, Qin, Y, Liskiewicz, TW, Beake, BD and Wang, S (2021) Crack propagation of a thin hard coating under cyclic loading: Irreversible cohesive zone model. Surface and Coatings Technology, 426. ISSN 0257-8972

Abdulsalam, M and Feng, J (2021) The composition of vulnerable plaque and its effect on arterial waveforms. Journal of the Mechanical Behavior of Biomedical Materials, 119. p. 104491. ISSN 1751-6161

Wang, D, Serracino-Inglott, F and Feng, J (2021) Numerical simulations of patient-specific models with multiple plaques in human peripheral artery: a fluid-structure interaction analysis. Biomechanics and Modeling in Mechanobiology, 20 (1). pp. 255-265. ISSN 1617-7940

Feng, J, Wang, N, Wang, Y, Tang, X and Yuan, J (2020) Haemodynamic mechanism of formation and distribution of coronary atherosclerosis: A lesion-specific model. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 234 (11). pp. 1187-1196. ISSN 0954-4119

Kendall, J, Serracino-Inglott, F, Banks, C, Jamshidi, P, Attallah, M and Feng, J (2019) In-vitro Study of Effect of the Design of the Stent on the Arterial Waveforms. Procedia Structural Integrity, 15. pp. 33-40. ISSN 2452-3216

Abdulsalam, M and Feng, J (2019) Distinguish the Stable and Unstable Plaques Based on Arterial Waveform Analysis. Procedia Structural Integrity, 15. pp. 2-7. ISSN 2452-3216

Liao, Y, Lian, Z, Yuan, H, Feng, J and Cui, H (2019) Optimization of an intrinsically safe solenoid valve and the static and dynamic characteristics. International Journal of Applied Electromagnetics and Mechanics, 61 (1). pp. 111-122. ISSN 1383-5416

Long, R, Kelly, P, Sun, S, Feng, J, Wang, X and Li, W (2018) The Influence of Pits on the Tribological Behavior of Grey Cast Iron under Dry Sliding. Mathematical Problems in Engineering, 2018. p. 8767895. ISSN 1024-123X

Li, YongSheng, Chen, Jing, Wang, LiLi, Guo, Yuan, Feng, Jiling and Chen, WeiYi (2018) Experimental Verification of the Elastic Formula for the Aspirated Length of a Single Cell Considering the Size and Compressibility of Cell During Micropipette Aspiration. Annals of Biomedical Engineering, 46 (7). pp. 1026-1037. ISSN 0090-6964

Liao, Y, Lian, Z, Feng, J, Yuan, H and Zhao, R (2018) Effects of multiple factors on water hammer induced by a large flow directional valve. Strojniski Vestnik/Journal of Mechanical Engineering, 64 (5). pp. 329-338. ISSN 0039-2480

Sun, S, Xie, L, Kelly, P, Long, R, Li, M and Feng, J (2017) The Influence of Rotating Direction on the Tribological Behavior of Grey Cast Iron with Curve Distributed Pit Textured Surface. Mathematical Problems in Engineering, 2017. p. 8095916. ISSN 1024-123X

Feng, Jiling ORCID: https://orcid.org/0000-0001-5581-0623, An, Meiwen, Sashikumar, Sravanthi and Chen, Weiyi (2017) 3D computational fluid dynamic modelling for pulsatile blood wave propagation in the event of car crash. International Journal of Crashworthiness, 22 (4). pp. 394-400. ISSN 1358-8265

Liao, Y, Yuan, H, Lian, Z, Feng, J and Guo, Y (2015) Research and analysis of the hysteresis characteristics of a large flow directional valve. Journal of Mechanical Engineering (Strojniski Vestnik), 61 (6). pp. 355-364. ISSN 0039-2480

Conference or Workshop Item

Feng, J (2014) Coated surfaces in static line contact: numerical simulation and experimental validation,. In: 19th International Federation for Heat Treatment and Surface Engineering Congress (IFHTSE 2011), 17 October 2011 - 20 October 2011, Glasgow, UK.

Feng, J, Qin, Y, Lorusso, M and Ugues, D (2012) Prediction of the critical load of a metal-rolling system by considering the damage of the coated surface. In: 14th International Conference on Metal Forming, 16 September 2012 - 19 September 2012, Krakow, Poland.