Wear Behavioral Study of Hexagonal Boron Nitride and Cubic Boron Nitride-Reinforced Aluminum MMC with Sample Analysis

Rao, V, Periyaswamy, P, Bejaxhin, ABH ORCID: https://orcid.org/0000-0001-6188-3626, Naveen, E, Ramanan, N and Teklemariam, A ORCID: https://orcid.org/0000-0003-3807-3849 (2022) Wear Behavioral Study of Hexagonal Boron Nitride and Cubic Boron Nitride-Reinforced Aluminum MMC with Sample Analysis. Journal of Nanomaterials, 2022. 7816372. ISSN 1687-4110

Published Version Available under License Creative Commons Attribution. Download (3MB)

Abstract

During the stir casting process, different percent weights of hexagonal boron nitride (HBN) and cubic boron nitride (CBN) were mixed with aluminum alloy 6061. The test specimens are then machined from the cast aluminum metal matrix composites. The tests are carried out utilizing an ASTM G99-compliant pin-on-plate tribometer on a pivoting EN32 circle. Minitab 16 is used to plan the dry sliding wear trials, which are set up in an orthogonal array. The input parameters are percent HBN addition and CBN addition, sliding speed, and load, and the wear rate was considered to be the output parameter. The actual density of the cast specimens was found to be greater than 90% of their theoretical density. The accumulation of HBN and CBN greatly enhances the wear resistance of aluminum metal matrix composites, according to research. The technique of regression analysis is utilized to establish genuine links between the wear rate and input parameters. The morphology of the worn out surfaces was examined using a scanning electron microscope (SEM). After numerous iterations, the simulation source of DEFORM 3D forecasts the stress and velocity component of the frictional surface contact area.