e-space
Manchester Metropolitan University's Research Repository

    The Influence of Pits on the Tribological Behavior of Grey Cast Iron under Dry Sliding

    Long, R, Kelly, P, Sun, S, Feng, J, Wang, X and Li, W (2018) The Influence of Pits on the Tribological Behavior of Grey Cast Iron under Dry Sliding. Mathematical Problems in Engineering, 2018. p. 8767895. ISSN 1024-123X

    [img] Published Version
    Available under License Creative Commons Attribution.

    Download (4MB)

    Abstract

    © 2018 Risheng Long et al. Inspired by the nonsmooth surface of the head of the dung beetle, grey cast iron (GCI) samples with pit textured surfaces were designed and fabricated, based on pin-on-disc friction tester. Using a tribology wear testing rig and APDL programming, the tribological behavior of smooth and textured samples was investigated and reported, both experimentally and numerically. The results show that pits can significantly change the thermal stress and temperature distribution on the surface, which will result in either positive or negative effects on the wear resistance of GCI samples, depending on the parameters. When diameter of the pit (DOP) equals 0.8 mm and distance between pits (DBP) is 1.0 mm, the pit textured surface provided the best wear resistance among all samples tested.

    Impact and Reach

    Statistics

    Activity Overview
    6 month trend
    296Downloads
    6 month trend
    312Hits

    Additional statistics for this dataset are available via IRStats2.

    Altmetric

    Repository staff only

    Edit record Edit record