Possible methodology for niobium, tantalum and scandium separation in ferrocolumbite

Purcell, W, Potgieter, H, Nete, M and Mnculwane, H (2018) Possible methodology for niobium, tantalum and scandium separation in ferrocolumbite. Minerals Engineering, 119. pp. 57-66. ISSN 0892-6875

Preview

Available under License Creative Commons Attribution Non-commercial No Derivatives. Download (1MB) | Preview

Abstract

© 2018 Elsevier Ltd. Ferrocolumbite is a well-known source of Ta, Nb and Sc. However, separation of these elements from such ores/process tailings, as well from each other is problematic, and typically involves numerous separation steps and very corrosive and hazardous chemicals. An investigation was therefore launched to evaluate alternative separation options. As part of this endeavour it was necessary to investigate accurate quantification methods to be able to trace the elements during any proposed process. Ferrocolumbite was successfully dissolved with NH 4 F⋅HF (1:10 sample to flux ratio at 200 °C for 60 min), which yielded solutions containing 91% Ta, 96% Nb and 99% Sc recoveries while satisfactory LODs (0.07768, 0.01045 and 0.001085 mg/L respectively) were also obtained. Inclusion of a magnetic separation step (only 31% Fe in magnetic portion) to simplify the down-stream beneficiation processes did not contribute to the successful removal of Fe/Ti. Methyl isobutyl ketone (MIBK) successfully extracted the Ta in the ore (94%) into the organic layer and left Nb (88%) and Sc (99%) in the aqueous layer at [H 2 SO 4 ] < 8 M. At higher acid levels ([H 2 SO 4 ] > 10 M) the Sc present in the non-magnetic portion of the ore migrated in significant amounts and quantities (95%) to the organic layer. Thus a possible process for the separation of the three elements from one another was created. Octan-1-ol yielded similar results to MIBK while methyl isoamyl ketone (MIAK) successfully removed Ta from the aqueous layer (87%), but left the two other elements in the aqueous layer, even at 16 M [H 2 SO 4 ]. A much simplified process flow sheet compared to current operational practices for the possible separation of Nb, Ta and Sc from ferrocolumbite and mine tailings is proposed.